Inner Tube – Black, Oil and Heat resistant synthetic rubber based compound.
Reinforcement – Single braid of high tensile steel wire.
Cover – Black, Oil and abrasion resistant synthetic rubber compound.
Applications:
Petroleum base hydraulic fluid & lubricating oils.
Temperature Range:
-40°C to +100°C
| DASH | DN | HOSE ID | BRAIDING | HOSE OD | MAX WORKING | MINIMUM BURST | MINIMUM BAND | ||||||
| INCH | MM | INCH | MM | INCH | MM | PSI | BAR | PSI | BAR | INCH | MM | ||
| 4 | 6 | 1/4″ | 6.3 | 0.51 | 12.9 | 0.59 | 15 | 5800 | 400 | 23200 | 1600 | 3.94 | 100 |
| 5 | 8 | 5/16″ | 8.0 | 0.57 | 14.6 | 0.65 | 16.6 | 5075 | 350 | 20300 | 1400 | 4.53 | 115 |
| 6 | 10 | 3/8″ | 9.5 | 0.66 | 16.8 | 0.74 | 18.8 | 4780 | 330 | 19120 | 1320 | 5.12 | 130 |
| 8 | 12 | 1/2″ | 12.7 | 0.78 | 19.8 | 0.87 | 22 | 3990 | 275 | 15960 | 1100 | 7.09 | 180 |
| 10 | 16 | 5/8″ | 15.9 | 0.92 | 23.3 | 1.01 | 25.6 | 3625 | 250 | 14500 | 1000 | 7.87 | 200 |
| 12 | 20 | 3/4″ | 19.0 | 1.07 | 27.1 | 1.15 | 29.2 | 3120 | 215 | 12480 | 860 | 9.45 | 240 |
| 16 | 25 | 1″ | 25.4 | 1.37 | 34.9 | 1.48 | 37.6 | 2390 | 165 | 9560 | 660 | 11.8 | 300 |
| 20 | 32 | 1-1/4″ | 31.5 | 1.73 | 44.0 | 1.87 | 47.5 | 1810 | 125 | 7240 | 500 | 16.54 | 420 |
| 24 | 38 | 1-1/2″ | 38.0 | 2.00 | 50.9 | 2.14 | 54.5 | 1300 | 90 | 5200 | 360 | 19.68 | 500 |
| 32 | 50 | 2″ | 50.8 | 25.00 | 63.5 | 2.64 | 67 | 1160 | 80 | 4640 | 320 | 24.8 | 630 |
Frequently Asked Questions
R2 AT hydraulic hoses are commonly used for hydraulic fluids, lubricating oils, industrial machinery, and other demanding hydraulic applications.
Working pressure varies according to hose diameter. The range listed on this page covers different pressure ratings across sizes, so selection should match the equipment’s operating requirements.
Consider hose ID, required flow, working pressure, bend radius, fluid compatibility, fittings, and machine specifications before choosing a size.
R1 AT and R2 AT hoses are intended for hydraulic applications, but buyers should compare reinforcement, pressure rating, size, and equipment requirements before selection.
Yes. The R2 AT hose listed on the page is intended for petroleum-based hydraulic fluids and lubricating oils.
The R2 AT hydraulic hose listed on the page has a temperature range of -40°C to +100°C.
R2 AT hydraulic hoses can be sourced for industrial requirements in Ahmedabad, Vatva, Odhav, Naroda, Rakhial, Kathwada, Changodar, Sanand, and nearby areas of Gujarat. The supplier listed on the page is based in Ahmedabad.
Looking for R2 AT Hydraulic Hoses for Your Application?
Choose the right R2 AT Hydraulic Hose based on pressure, size, fluid, fittings, and operating conditions. Get suitable hydraulic hose solutions for machinery and industrial applications in Ahmedabad, Gujarat, and across India.