Inner Tube – Black, Oil and Heat resistant synthetic rubber based compound.
Reinforcement – Single braid of high tensile steel wire.
Cover – Black, Oil and abrasion resistant synthetic rubber compound.
Applications:
Petroleum base hydraulic fluid & lubricating oils.
Temperature Range:
-40°C to +100°C
| DASH | DN | HOSE ID |
BRAIDING OD |
HOSE OD |
MAX WORKING PRESSURE |
MINIMUM BURST PRESSURE |
MINIMUM BAND RADIUS |
||||||
| INCH | MM | INCH | MM | INCH | MM | PSI | BAR | PSI | BAR | INCH | MM | ||
| 4 | 6 | 1/4″ | 6.3 | 0.44 | 11.3 | 0.53 | 13.5 | 3265 | 225 | 13000 | 900 | 3.94 | 100 |
| 5 | 8 | 5/16″ | 8.0 | 0.51 | 13.0 | 0.60 | 15.2 | 3115 | 215 | 12475 | 860 | 4.53 | 115 |
| 6 | 10 | 3/8″ | 9.5 | 0.59 | 15.1 | 0.69 | 17.4 | 2610 | 180 | 10450 | 720 | 5.12 | 130 |
| 8 | 12 | 1/2″ | 12.7 | 0.71 | 18.0 | 0.81 | 20.5 | 2320 | 160 | 9280 | 640 | 7.09 | 180 |
| 10 | 16 | 5/8″ | 15.9 | 0.84 | 21.4 | 0.94 | 23.9 | 1885 | 130 | 7520 | 520 | 7.87 | 200 |
| 12 | 20 | 3/4″ | 19.0 | 1.00 | 25.5 | 1.10 | 27.9 | 1520 | 105 | 6100 | 420 | 9.45 | 240 |
| 16 | 25 | 1″ | 25.4 | 1.30 | 33.0 | 1.40 | 35.7 | 1275 | 88 | 5100 | 352 | 11.8 | 300 |
| 20 | 32 | 1-1/4″ | 31.5 | 1.59 | 40.5 | 1.71 | 43.5 | 915 | 63 | 3650 | 252 | 16.54 | 420 |
| 24 | 38 | 1-1/2″ | 38.0 | 1.83 | 46.5 | 1.98 | 50.2 | 725 | 50 | 2900 | 200 | 19.68 | 500 |
| 32 | 50 | 2″ | 50.8 | 2.37 | 60.2 | 2.52 | 64 | 580 | 40 | 2700 | 160 | 24.8 | 630 |
Frequently Asked Questions – Hydraulic Hoses R1 AT
R1 AT hydraulic hoses are commonly used for petroleum-based hydraulic fluids, lubricating oils, and general hydraulic systems.
Working pressure depends on hose size, so buyers should select the hose according to machine pressure, flow, and application requirements.
Check the hose inner diameter, system pressure, fluid type, bend radius, fitting size, and equipment specifications before selection.
R1 AT generally uses one steel-wire braid, while R2 AT uses two wire braids and is preferred for higher-pressure applications.
Yes, R1 AT hoses are commonly used with petroleum-based hydraulic oils, but fluid compatibility should always be confirmed before use.
Yes, R1 AT hoses can be used with suitable hydraulic fittings and assemblies based on size, pressure, and connection requirements.
R1 AT hydraulic hoses are available for buyers in Ahmedabad, Naroda, Odhav, Vatva, Rakhial, Kathwada, Changodar, Sanand, and other industrial areas of Gujarat.
Need the Right R1 AT Hydraulic Hose for Your Application?
Choose the correct R1 AT Hydraulic Hose based on pressure, size, fluid type, fittings, and operating conditions. Get suitable hose options for industrial and hydraulic applications across Ahmedabad and Gujarat.